Backwash Flush Valve Kit with Flow Restrictor 1/4" Push Fit

Description

Backwash, Flush valve with flow restrictor for use with unpumped RO units using standard ¼” pipe. This restrictor is installed on the waste water line on the RO unit and allows the membrane to be backwashed/flushed by opening the in-line valve. This should be done on a weekly basis to prolong the life of the membrane.

The flow restrictor is available as either 300cc, 450cc, 550cc or 650cc. 

300cc – Suitable for use with 36gpd and 50gpd membranes

450cc – Suitable for use with 75gpd membranes

550cc – Suitable for use with 100gpd membranes

650cc – Suitable for use with 150gpd

 ¼” push fittings on either side